Home > News
How to Solve the Trivial Problems in CNC Parts Processing?

How to Solve the Trivial Problems in CNC Parts Processing?

Pulished on May. 22, 2020

As a Die Casting Parts Wholesaler, share with you. CNC machining parts are a method of processing some parts on a CNC lathe. The machining process of CNC machine tools and traditional machine tools are basically the same, and there is no big difference. Mainly solve the problems of variable parts, small batches, complex shapes and high precision requirements. The CNC processing technology is divided into finer parts. For example, the bearing journal + 60mm surface has undergone rough turning, fine turning, rough grinding and final grinding. Multiple CNC precision machining processes, and there are some heat treatment processes in the middle, to reduce the internal stress deformed. For example, when these CNC machining will have noise, the noise is mainly generated by the oil pump and valve. When the valve is noisy, the reason is that the flow exceeds the rated standard, and the flow should be adjusted appropriately; when the oil pump is noisy, the reason and the corresponding solutions are also multi-faceted, such as high oil viscosity and low oil temperature. To raise the oil temperature; when there are bubbles in the oil, the air in the system should be released.

Custom Die Casting Parts

Custom Die Casting Parts

1. Increased metal processing volume of the middle frame: 3D glass case mobile phones have higher metal strength requirements, 6,7 series aluminum alloys can barely meet, but more will tend to stainless steel, stainless steel processing difficulty, working hours will increase;

2. Increased amount of graphite molds for CNC machining: 3D glass hyperboloid screen, using CNC machining is very cost-effective, long working hours, and low efficiency. At present, most of them are using hot bending machines. The hot bending of glass requires more graphite furnace molds, so part of the CNC production capacity will shift from metal processing to graphite mold processing;

3. OEM CNC Machining Parts turned to the edging of the glass: In order to fit the screen to the mobile phone, 3D glass needs finishing edging, so some CNCs will turn to the edging of the glass

In the age when the mechanical equipment was immature, the mechanical parts processing manufacturers processed according to the traditional processing method, which not only affected the production speed of the workpiece, but also affected the quality of the workpiece. Nowadays, precision machinery parts processing can meet this standard, relying on advanced manufacturing technology, high precision and high efficiency automated processing equipment.

Our company also has Custom Die Casting Parts for sale, please contact us.


Back to List
Share:
LATEST POST
Ningbo Target IMP. &EXP. Co. Ltd.
Ningbo Target IMP. &EXP. Co. Ltd.

Pulished on May. 22, 2020

Main Products
Main Products

Pulished on May. 22, 2020