Home > News
What are the Operating Procedures for Hardware Parts Processing?

What are the Operating Procedures for Hardware Parts Processing?

Pulished on Jun. 23, 2020

As a CNC Machining Parts Manufacturers, share with you the specific steps of metal processing operations, let's learn together:

OEM CNC Machining Parts

OEM CNC Machining Parts

1. Before entering the work position, all employees need to check whether their clothing meets the requirements of the job. It is absolutely not allowed to wear slippers, high heels and clothing that affects work safety. If you have long hair, you need to wear a hard hat. You need to maintain the right qualifications and have enough spirit to cope with the work. If you find that you are unwell, you need to leave the job immediately and report it to the leader. When you are operating, you must concentrate on your mind. Chatting is strictly prohibited. You need to cooperate with each other. The operator is not allowed to have irritability and When operating in a tired state, a safety accident occurs;

2. Before the mechanical work, check whether the moving part is filled with lubricating oil, then start and check whether the clutch and brake are normal, and run the machine for one to three minutes, and it is strictly prohibited to operate when the machine is faulty;

3. When changing the mold, the power should be turned off first. If it is a punch, the installation and debugging of the mold should be started after the movement of the punch is stopped. After the installation and debugging, move the flywheel to test twice by hand and check the upper and lower molds. Whether it is symmetrical and reasonable, whether the screws are tight, and whether the blank holder is in a reasonable position;

4.After all other personnel have left the mechanical work area, take away the debris on the workbench before they can start the power supply and start the machine;

5. After the machine tool is started, one person transports the material and performs the mechanical operation. Others are not allowed to press the button or the foot pedal switch. It is more strictly prohibited to put your hand into the mechanical work area or touch the moving part of the machine with your hand. The mechanical work It is forbidden to extend your hand into the slider work area, and it is strictly forbidden to pick and place parts by hand. When picking and placing parts in the die, you must use tools that meet the requirements. If you find that the machine has abnormal sounds or the machine fails, you should immediately turn off the power Switch on and check;

6. When you leave work, you should turn off the power and sort out the finished products, side materials and debris on the job to ensure the cleanliness and safety of the working environment;

Our company also has OEM CNC Machining Parts for sale, please contact us.


Back to List
Share:
LATEST POST
Ningbo Target IMP. &EXP. Co. Ltd.
Ningbo Target IMP. &EXP. Co. Ltd.

Pulished on Jun. 23, 2020

Main Products
Main Products

Pulished on Jun. 23, 2020